Forum Post: RE: EPS Color Coding Automation
Sweet fix, Rob! Thank you. Vincent T. (Tom) Zarzaca PE | Project Engineer Integrated Science & Engineering, Inc. | 1039 Sullivan Road, Suite 200 | Newnan, Georgia 30265 T: 678.552.2106 | F:...
View ArticleForum Post: RE: EPS Color Coding Automation
Thank you Craig. Auto refresh was the ticket. Vincent T. (Tom) Zarzaca PE | Project Engineer Integrated Science & Engineering, Inc. | 1039 Sullivan Road, Suite 200 | Newnan, Georgia 30265 T:...
View ArticleForum Post: RE: Undefined Isolation Valves Imported through ModelBuilder
I'm glad you were able to figure it out. This is documented in the following article for future reference. Assigning isolation valves to pipes in batch
View ArticleWiki Page: Annotation or Color Coding not updating when scrolling through...
Applies To Product(s): WaterGEMS, WaterCAD, SewerGEMS, SewerCAD, CivilStorm, HAMMER Version(s): V8i, CONNECT Edition Area: Modeling Original Author: Scott Kampa, Bentley Technical Support Group Problem...
View ArticleForum Post: RE: EDITTING A WATER CAD FILE INSIDE AUTOCAD CIVIL 3D
You may have to export the model to shapefile and then import it to civil3d to make a profile/alignment out of it.
View ArticleWiki Page: Can WaterGEMS/CAD or HAMMER display elements in 3D?
Applies To Product(s): WaterGEMS, HAMMER, WaterCAD Version(s): 08.11.XX.XX, 10.01.01.04 Area: Output and Reporting Original Author: Mark Pachlhofer, Bentley Technical Support Group Problem Can...
View ArticleWiki Page: Civil3D integration (Pipe network import/export)
Applies To Product(s): StormCAD, Civilstorm, SewerGEMS, SewerCAD, WaterCAD, WaterGEMS, HAMMER Version(s): V8i, CONNECT Edition Area: Data Import/Export Original Author: Glory John, Bentley Technical...
View ArticleForum Post: RE: EDITTING A WATER CAD FILE INSIDE AUTOCAD CIVIL 3D
Hello Mulongo, When working in WaterGEMS for AutoCAD Civil 3D, profiles utilize the native WaterGEMS profiling tools. However, you can still make changes to the WaterGEMS model. When moving the cell...
View ArticleProduct release (estimated) - Storm/Sewer
Estimated release date for Storm and Sewer CONNECT Edition Update 2: end of September, 2018. Subject to change. This applies to the following products: SewerGEMS SewerCAD CivilStorm StormCAD How can I...
View ArticleProduct release (estimated) - Water
Estimated release date for WaterCAD, WaterGEMS and HAMMER CONNECT Edition Update 2: October, 2018. Subject to change. How can I find out when a new version or patch is released for a Hydraulics and...
View ArticleForum Post: RE: Please help me clarify
Hello Doan, 1. The difference in results is likely related to a relative inaccuracy in the results when using the larger time step, owing to the length adjustments that occur in such cases. This is...
View ArticleForum Post: Hammer - Check Valve Characteristics - Reverse Velocity vs...
Hi, I was wondering if anyone could offer an advice regarding modeling a check valve. I am modeling a water supply system with pumps transporting flow from the balance tank to the reservoir. When I...
View ArticleForum Post: RE: Hammer - Check Valve Characteristics - Reverse Velocity vs...
Hello Marketa, You can model check valve element separately, below is technote which explains how to model check valve element in Hammer in detail. Modeling Reference - Check Valves However Dynamic...
View ArticleForum Post: Element selection in the AutoCAD environment (OSNAP)
Regarding the above subject and the following post...
View ArticleForum Post: RE: Element selection in the AutoCAD environment (OSNAP)
Hello Mohammad, As per the article there are three scenarios discussed. Out of these which is the one resembling your problem? In OSNAP settings have you tried to turn on all snaps? Kindly clarify your...
View ArticleForum Post: RE: Element selection in the AutoCAD environment (OSNAP)
Hi Yashodhan - that what I am referring to; the Osnap is turned on but it does not function with SewerGEMS/WaterCAD, while it is functioning only with Autocad without integration.
View ArticleForum Post: RE: Element selection in the AutoCAD environment (OSNAP)
Hi Mohammad, I did some testing in WaterCAD integrated with AutoCAD 2018. The snap is working fine for midpoint, nearest, perpendicular, intersection etc. You can try the following options; 1. In snap...
View ArticleForum Post: A third scenario is not displayed in a Custom Report Transient...
My Custom Report displays 2 scenarios in graphs successfully, but when adding a third scenario, I am unable to see that scenario. I've confirmed the results do exist by looking at time history graphs...
View ArticleForum Post: Watercad
Good day everybody, I'm new here. Just I was wondering, can I learn Watercad by myself without attending any course?? If anyone knows any online course related to that it will be great. Thank you so much.
View ArticleForum Post: RE: A third scenario is not displayed in a Custom Report...
Hello Joel, I see that you also created a service request. I will work through the forum for now, so that other users might benefit. I tried this in a sample model and I was able to see all three...
View Article