Hello Joel, I see that you also created a service request. I will work through the forum for now, so that other users might benefit. I tried this in a sample model and I was able to see all three scenarios in the custom report. The first thing I would suggest is upgrading to the latest version of HAMMER. The steps to do this can be found at this link . Another thing to try is to maybe isolate the main model files from the supporting and report files. If there is an issue with the report files, this might impact what you are seeing. To do this, close the model (you can leave HAMMER open) and then browse to where the model is saved. Create a new folder and copy just the .wtg and .wtg.sqlite files to the new folder. Then open the model from new folder location and see if the issue still occurs. If that doesn't help, it will be useful to see a copy of the model files. To send this, you can use the steps in this link: Sharing Hydraulic Model files on the Haestad forum . Regards, Scott
↧