Wiki Page: when do I need to start worrying about the error, 1%, 5% 10%
Applies To Product(s): Bentley SewerGEMS Version(s): 08.11.03.84 Environment: N/A Area: Help and Documentation Subarea: Original Author: Mark Pachlhofer, Bentley Technical Support Group...
View ArticleWiki Page: Changing units or converting units for elements
Applies To Product(s): Bentley WaterGEMS, Bentely WaterCAD, Bentley CivilStorm, Bentley StormCAD, Bentley SewerGEMS, Bentley PondPack Version(s): 08.11.XX.XX Environment: N/A Area:...
View ArticleWiki Page: What is the continuity error and what's a good percentage for it?
Applies To Product(s): Bentley SewerGEMS, Bentley CivilStorm Version(s): 08.11.03.84 Environment: N/A Area: Help and Documentation Subarea: Original Author: Mark Pachlhofer, Bentley Technical Support...
View ArticleWiki Page: Creating Controls - Conditions, Actions and Control Sets [TN]
Applies To Product(s): Bentley WaterGEMS V8i, Bentley WaterCAD V8i Version(s): 08.11.XX.XX Environment: N/A Area: N/A Subarea: N/A Original Author: Akshaya Niraula, Bentley...
View ArticleWiki Page: Is it valid to average a pipe roughness if I know my roughness is...
Applies To Product(s): Bentley WaterGEMS Version(s): 08.11.04.58 Environment: N/A Area: Modeling Subarea: Original Author: Mark Pachlhofer, Bentley Technical Support Group Problem...
View ArticleWiki Page: I have a section of pipe that is made of two materials. Can I just...
Applies To Product(s): Bentley WaterGEMS,Bentley SewerGEMS, Bentley CivilStorm, Bentley StormCAD, Bentley PondPack, Bentley StormCAD, Bentley HAMMER, Bentley WaterCAD Version(s): 08.11.04.58...
View ArticleForum Post: Saving down to an older version
Dear MPmachlhofer, Some softwares like AutoCad or Microsoft Word or Excel or… let us save files in a way that can be opened with lower versions. Why this option has not been put for WaterGems? Has it...
View ArticleForum Post: RE: Darwin Calibrator
Dear MPachlhofer Do not you think the word 'fitness' (in Darwin Calibrator) is not suitable for the function it refers to? Low fitness means upper accuracy. I guess 'deviation' is more suitable...
View ArticleForum Post: RE: Darwin Calibrator
Sim, The word 'fitness' is entirely suitable for Darwin Calibrator because that is what is being measured. I suppose they could have gone with deviation, but keep in mind that the algorithm that...
View ArticleForum Post: RE: An absolute 'Fluid Mechanics' Question
Salaam Tom I know how to generate 'system head curve' and 'pump head curve'. Let me ask my question clearly: Suppose there is just one pump we have to use. It's 'optimal operating point' is clear for...
View ArticleForum Post: RE: Saving down to an older version
Sim, I think part of what you are looking for is explained in this wiki post: communities.bentley.com/.../10184.can-a-model-be-saved-down-to-an-older-version.aspx In the first paragraph you'll see it...
View ArticleWiki Page: How to search for Haestad software content on BE Communites
Applies To Product(s): Bentley WaterCAD Version(s): 08.11.04.58 Environment: N/A Area: Other Subarea: Original Author: Mark Pachlhofer, Bentley Technical Support Group...
View ArticleWiki Page: Citect ctAPI dlls are missing - SCADAConnect - Connection Manager...
Applies To Product(s): Bentley SCADAConnect Version(s): 08.11.xx.xx Environment: N/A Area: Data Source Connection Subarea: Citect Original Author: Akshaya Niraula, Bentley...
View ArticleComment on sewer gemsss
Hi, Flow is coming higher than given loading count on manhole in sewerGems someone can help me? what can i do? for correct flow
View ArticleForum Post: RE: An absolute 'Fluid Mechanics' Question
The easiest and cheapest solution is to trim the impeller to better match the system head curve and move the operating point to the best effiiciency point. In the model, modify the pump head curve...
View ArticleForum Post: RE: An absolute 'Fluid Mechanics' Question
And you don't always need to trim the impeller. Once you determine the size needed, you can buy a replacement and save the original one in case you want to go back to it.
View ArticleWiki Page: Element is visible in the flextables but not visible in the drawing
Applies To Product(s): Bentley WaterGEMS, Bentley WaterCAD, Bentley HAMMER, Bentley SewerGEMS, Bentley SewerCAD, Bentley StormCAd, Bentley CivilStorm, Bentley StormCAD, Bentley PondPack...
View ArticleWiki Page: I don't see any elements listed in my flextables
Applies To Product(s): Bentley WaterGEMS, Bentley SewerGEMS, Bentley CivilStorm, Bentley StormCAD, Bentley PondPack, Bentley StormCAD, Bentley HAMMER, Bentley WaterCAD Version(s): 08.11.XX.XX...
View ArticleForum Post: Hammer User Notification
What does this mean? Message ID: 45926 "There is a data error affecting a diameter change or air valve. Change flow(s) in adjacent pipe(s) to preclude initial pocket formation."
View ArticleForum Post: RE: Darwin Calibrator-Arrangement of Data
Hi Jesse, Attached here with a flow and pressure data that I need to combine as a requirement by Darwin Calibrator. I hope you could help me to figure out or maybe some idea how it could be done....
View Article