Forum Post: RE: Hammer User Notification
Hello Benson , There is an identical post on Be-communities for the issue you are facing. communities.bentley.com/.../88384.aspx You will find the solution here. Thanks Sushma.
View ArticleForum Post: Conduit Cover Information in CivilStorm
Hello, I have been using Bentley StormCAD and SewerCAD for long time. Recently I have started using CivilStorm as well for analysis of storm drainage network. I found out that it is now possible to...
View ArticleComment on sewer gemsss
Hello Kinjal , This is not the right place to post your queries. We have a forum on Be-communities where users post their queries & which are answered by Bentley Colleagues.....
View ArticleForum Post: Scenario comparison - total demand comparison
Hello. Is there any way to compare total demand for two scenarios? I made one scenario for average year flow and another for maximum daily flow and I want to have two tables, and those are total...
View ArticleForum Post: RE: Age analysis - Tank empty
Hey RSP, Age Analysis works best when there is a fluctuation of Tank level. Since the Tank levels are always full it may be easier to get rid of the Tanks entirely and use the Reservoir as the sole...
View ArticleForum Post: RE: Scenario comparison - total demand comparison
Hello, There are a couple of ways to find the total demanded flow. The following solution has details on the available options;...
View ArticleForum Post: RE: Conduit Cover Information in CivilStorm
Hello, While cover is not a property field currently in CivilStorm, it is still accounted for during Design runs when you use the GVF-Rational (StormCAD) solver. You can see cover indirectly by...
View ArticleWiki Page: How do you have modelbuillder create just one feature from a...
Applies To Product(s): Bentley WaterGEMS, Bentley SewerGEMS, Bentley CivilStorm, Bentley StormCAD, Bentley PondPack, Bentley StormCAD, Bentley HAMMER, Bentley WaterCAD Version(s): 08.11.XX.XX...
View ArticleForum Post: RE: Age analysis - Tank empty
Hey Dan, These three tanks are constructed for 1 day storage volume. If any maintenance works carried out in the transmission main, these tanks will take care of supply. Further, age analysis will be...
View ArticleForum Post: RE: Scenario comparison - total demand comparison
Hello Igor, I have created a feature request for enhanced reporting of total demand. The reference number is 79820. Note that one other option you can try is temporarily changing the demand units....
View ArticleForum Post: RE: Conduit Cover Information in CivilStorm
Hello Chinmay, So you know, this has been logged with the development team so that "Cover" and other related Design results will be added to a future release of CivilStorm. The reference number for...
View ArticleForum Post: RE: Darwin Calibrator-Arrangement of Data
Hello, It looks like you have pressure and flow recordings for a few locations, with hundreds of data points each. You probably don't need to import a field data snapshot for each and every one of...
View ArticleForum Post: RE: Hammer User Notification
Hello, We took look at the model, and found some things that will get the model to compute without an error message. First, you can change the attribute "Use Extended CAV?", found in the transient...
View ArticleForum Post: RE: Scenario comparison - total demand comparison
We do have a graph where you can compare the system demands for different scenarios. Compute your scenario(s), then on the Calculation Summary window click the Graph button (at the top of the window,...
View ArticleWiki Page: Can modelbuilder use shapefiles that have just a defined...
Applies To Product(s): Bentley WaterGEMS, Bentley SewerGEMS, Bentley CivilStorm, Bentley StormCAD, Bentley PondPack, Bentley StormCAD, Bentley HAMMER, Bentley WaterCAD Version(s): 08.11.XX.XX...
View ArticleForum Post: Fire flow analysis
Hi all, I'd like to reopen this thread, cos I'm having certain doubts regarding the fire flow results. Further to all said above, I'd like to pose one additional question: If my system is able to...
View ArticleForum Post: Pump selection by waterGEMS
I would like to know if watergems can calculate the pipe losses for a chilled water closed loop system so that i can select the pump ?
View ArticleForum Post: Multiple selection set selection
Hi BeCommunity! Maybe that is a strange topic, but I have one problem and that is how to select several selection set in drawing at once? I can go trough Selection Sets window and select one by one...
View ArticleForum Post: RE: Fire flow analysis
A fire flow result of 1500 L/min means that 1500 can be delivered to that node in the system. Conservatively, the means that you will get at least 750 L/min at each hydrant although (if hydrants are...
View ArticleForum Post: RE: Pump selection by waterGEMS
Hello Ahmed, Check out the below Support Solution article on modeling closed loop systems: communities.bentley.com/.../modeling-a-closed-loop-system.aspx You can find other solutions and discussions...
View Article