Forum Post: RE: How to create a list of materials in WaterCAD and WaterGem?
It's not part of WaterGEMS. It's a separate product. Here's a general class on open utilities. learn.bentley.com/.../ViewLearningPathDetails
View ArticleForum Post: The maximum elevation for the rating table is not the same as the...
I keep getting this error, even though my rating table elevations are relative. You can even see in the error notification that there should not be an error (90.6 + 0 = 90.6 !) How do I make this error...
View ArticleForum Post: VSP in Parallel for EPS run
In my hydraulic model, I am getting two operating heads for the VSP pump for two scenarios namely peak flow and lean flow scenario. Also to maintain the minimum target head at all nodes in the model, I...
View ArticleForum Post: Maximum Drop Depth in Manhole
Hello Everyone, I would like to know if there is a possibility of restricting maximum depth of drop in SewerGEMS. At present i have to do this manually, but can this be automated in design? Regards...
View ArticleForum Post: RE: VSP in Parallel for EPS run
Use components - controls to give control conditions and corresponding action for your pump.Give your controls as function of flow, if flow is less, system curve will have gentle slope and static head...
View ArticleForum Post: RE: The maximum elevation for the rating table is not the same as...
Hello Mark, Please see the below mentioned wiki's, it should help you out.
View ArticleWiki Page: How can you construct a time-depth table from an IDF table/curve?
Product(s): Bentley CivilStorm, SewerGEMS, PondPack Version(s): 08.11.XX.XX Area: Layout and Data Input Problem How can you construct a time-depth table from an IDF table/curve? When using the "add...
View ArticleWiki Page: Modifying and adding entries to Engineering Libraries
Product(s): Bentley SewerGEMS, CivilStorm, StormCAD, SewerCAD, PondPack Version(s): 08.11.XX.XX Area: Layout and Data Input How do I change data in existing engineering libraries or add to it? For...
View ArticleForum Post: Twin screw pump modeling (PD type)
I would like to model the Twin screw pump (PD type pump) in Hammer. The presently available one blog related to positive displacement pump modelling is not solving my whole issue. The screw pump in my...
View ArticleForum Post: RE: Maximum Drop Depth in Manhole
Hello Jatin, I have created enhancement for this, which will consider to include the criteria in the default design constraints for limitation on maximum depth of drop as we have for minimum depth of...
View ArticleForum Post: RE: How to create a list of materials in WaterCAD and WaterGem?
But, how going i download deste Bentley Designer Workflow Manager? I could not understand this part. What would the software be?
View ArticleForum Post: RE: The maximum elevation for the rating table is not the same as...
Hi Sushma, I have seen those threads already. As I mentioned in my post my elevation are already entered as relative. You can see from my second post with the screen shot that they are relative. You...
View ArticleForum Post: RE: The maximum elevation for the rating table is not the same as...
Hello Mark, Try adding some decimal places (right click > units and formatting) to confirm that the numbers do indeed add up exactly. If this does not help, please confirm your Bentley product...
View ArticleForum Post: RE: Twin screw pump modeling (PD type)
Hello Tushar, I assume you're referring to this article: Modeling positive displacement pumps in HAMMER What problem did you encounter when using the Periodic Flow element to model this situation, or...
View ArticleForum Post: RE: How can i override field collected data in model?
From your reply i get that i can't override field data for a particular element in model, either i can bring that data and can use to make comparison graph between field data and model data or use the...
View ArticleForum Post: Fixing Chainage for manholes
Hello Everyone, I would like to know if there is a possibility of fixing chainages of our own choice for the starting manholes so that when we prepare L-section in SewerGEMS, the chainages get...
View ArticleForum Post: RE: Maximum Drop Depth in Manhole
Hi Sushma, Thanks for the reply. At present i am using the method suggested by you. However, once the maximum drop depth enhancement gets incorporated in SewerGEMS, it will save considerable time. Best...
View ArticleForum Post: RE: Displaying graphs In SewerGEMS while using groundwater package
here are the two graphs and please note that I have only one scenario and there is no chance to switch between scenarios.
View ArticleForum Post: RE: Displaying graphs In SewerGEMS while using groundwater package
Hello Ahmed, Could you please help us with the version of SewerGEMS that you are using? You can see how to locate the version no. in Jesse's reply. If required we can take this of forum to discuss over...
View Article