Forum Post: RE: Displaying graphs In SewerGEMS while using groundwater package
here is the version details that I use as well
View ArticleForum Post: RE: Fixing Chainage for manholes
Hello Jatin, Once you have created a profile, right click on the profile label>Edit>Change the stations in the column - "User defined column", change the starting manhole's station to your...
View ArticleForum Post: RE: How can i override field collected data in model?
You can add multiple entries say for pressure for an element using the Time Series Field data in the model.
View ArticleWiki Page: How do I model parallel fixed head (target head) variable speed...
Applies To Product(s): Bentley WaterGEMS, Bentley HAMMER, Bentley WaterCAD Version(s): 08.11.XX.XX Original Author: Mark Pachlhofer, Bentley Technical Support Group Problem How do I model parallel...
View ArticleForum Post: RE: VSP in Parallel for EPS run
Monika, The wiki link below describes a workaround that is used for how to model fixed head VSPs in parallel. The workaround involves adding 5 junctions between your pump and the control nodes....
View ArticleForum Post: RE: How to create a list of materials in WaterCAD and WaterGem?
You can download the software with the steps in the following article. Downloading Haestad / Hydraulics and Hydrology Software When you type into the search bar use "Bentley OpenUtililities Designer"....
View ArticleForum Post: RE: SewerGems - simulate flooding after pump failure
Hello Stephen, Regarding "Does the sewergems implicit engine "initialize" the network at the start of a run?" - By default the solver assumes a dry condition to start the simulation, but gives two...
View ArticleForum Post: RE: Twin screw pump modeling (PD type)
Hello Tushar, The Periodic Head-Flow element represents a boundary condition which allows you to specify a constant head, constant flow, or any time-dependent variation, including periodic changes that...
View ArticleWiki Page: Scenario and Alternative Management
Applies To Product(s): WaterGEMS, WaterCAD, HAMMER, SewerCAD, StormCAD, SewerGEMS, CivilStorm, Pondpack Version(s): V8i or V8 XM Area: Modeling Original Author: Scott Kampa, Bentley Technical Support...
View ArticleWiki Page: Whats New In PondPack V8i [FAQ]
Applies To Product(s): Bentley Pondpack Version(s): V8i Area: Modeling Original Author: Jesse Dringoli, Bentley Technical Support Group What happened to the subarea and hydrograph queue node elements?...
View ArticleForum Post: RE: The maximum elevation for the rating table is not the same as...
Hi Jesse, I have tried checking the decimal places as well, with no luck. I have attached my model. I am using PondPack V8i. Thanks (Please visit the site to view this file)
View ArticleWiki Page: Notifications about minimum or maximum elevations on the rating...
Applies To Product(s): Bentley PondPack Version(s): 08.11.01.56 Area: Modeling Original Author: Akshaya Niraula, Bentley Technical Support Group Problem When attempting to validate or compute a model...
View ArticleForum Post: RE: The maximum elevation for the rating table is not the same as...
Hi Mark, Thanks for sending the files. I'm uncertain exactly why this is needed, but if you change the datum to zero and re-type in the values, it works. Here's the "fixed" model: Basically I changed...
View ArticleForum Post: RE: The maximum elevation for the rating table is not the same as...
Thanks Jesse, that worked!
View ArticleWiki Page: Converting your model elements to shapefiles
Applies To Product(s): Bentley WaterGEMS, Bentley SewerGEMS, Bentley CivilStorm, Bentley StormCAD, Bentley PondPack, Bentley StormCAD, Bentley HAMMER, Bentley WaterCAD Version(s): 08.11.XX.XX Area:...
View ArticleWiki Page: Using the ModelBuilder Connection file - Can a ModelBuilder file...
Applies To Product(s): Bentley WaterGEMS, Bentley SewerGEMS, Bentley CivilStorm, Bentley StormCAD, Bentley PondPack, Bentley SewerCAD, Bentley HAMMER, Bentley WaterCAD Version(s): 08.11.XX.XX Original...
View ArticleWiki Page: Understanding Hydraulics and Hydrology Functionality in Subsurface...
Applies To Product(s): Civil products (as listed) Version(s): 08.11.XX.XX Area: Modeling Original Author: Sushma Choure, Bentley Technical Support Group Overview The purpose of this TechNote is to help...
View ArticleWiki Page: Using the Scenario Energy Cost and Energy Management tools in...
Product(s): WaterGEMS, WaterCAD Version(s): 08.11.04.xx and later, 10.xx.xx.xx Area: Modeling Overview This article explains how to use the Scenario Energy Cost and Energy Management tools. The images...
View ArticleWiki Page: SewerCAD TechNotes and FAQs
This article provides a list of in-depth TechNotes and FAQs for Bentley SewerCAD. To search within this page, press [Ctrl]+F. Frequently Asked Questions SewerCAD General FAQs Modeling Creating...
View ArticleWiki Page: SewerGEMS TechNotes and FAQs
This article provides a list of in-depth TechNotes and FAQs for Bentley SewerGEMS. To search within this page, press [Ctrl]+F. Frequently Asked Questions SewerGEMS General FAQs SewerGEMS For ArcGIS...
View Article