Forum Post: RE: SewerCAD to AutoCAD Civil 3D
Hello Alex, You can export the model with pipe diameter & pipe height data in the form of dxf which you can open in AutoCAD , what you need to do is annotate the pipes through Element Symbology in...
View ArticleForum Post: RE: SewerCAD to AutoCAD Civil 3D
Also if you work with pipe networks in Civil3D, you can export the SewerCAD model to the standard LandXML format. Here's a related article:...
View ArticleForum Post: RE: Insert image background in existing WaterCAD model
Hi Igor, WaterCAD StandAlone does provide you with the control you need. If you know the real coordinates of where the image should appear, simply enter those X,Y coordinates in (for Bottom Left,...
View ArticleForum Post: RE: SewerCAD to AutoCAD Civil 3D
Hi Alex, You can export to shapefile from FlexTables (and you can customize the FlexTable to include the data you're interested in). So if Civil3D provides the needed shapefile import support, that...
View ArticleForum Post: RE: system head curve
I think I have not introduced my problem clearly. My closed system is a closed loop system. i.e the pump is used to circulate the water in a closed loop only against the losses & pressure drops in...
View ArticleForum Post: RE: system head curve
You will still need to watch out for the status of the other parallel pumps when looking at the system head curve; the article you referenced would still apply. If you want to see "static head", turn...
View ArticleForum Post: WaterCAD and WaterGEMS SELECTseries 4 (08.11.04.57) Patch Silent...
We are trying to figure out what switch to use to do a "silent install" of the new (08.11.04.57) Patch for WaterCAD and WaterGEMS? We have several computers that only have SS4 of WaterCAD and would...
View ArticleForum Post: RE: system head curve
Without demands the problem is simpler. However, you still need a fixed grade node corresponding to the initial charge of the system somewhere in the model. Just connect a reservoir node to one of the...
View ArticleForum Post: RE: system head curve
Also here's a link to a similar forum discussion from a few years ago: communities.bentley.com/.../171061.aspx
View ArticleForum Post: RE: Isolated Tank in HAMMER
Hello Amy, There are a couple of things that you can look at. First, open the pipe properties and check the pipe attribute "Status (Calculated)," which will show the status of the pipe that is used by...
View ArticleForum Post: RE: WaterCAD and WaterGEMS SELECTseries 4 (08.11.04.57) Patch...
Hi Steve, There are no silent install switches for the patch sets, but if you want you can definitely extract the necessary information from them and repackage it. If you take a program like 7 zip or...
View ArticleWiki Page: Exporting model file into a readable formal for AutoCAD Civil3D or...
Applies To Product(s): Bentley StormCAD, Bentley SewerCAD, Bentley SewerGEMS, Bentley CivilStorm Version(s): 08.11.xx.xx Environment: N/A Area: Layout and Data Input Subarea:...
View ArticleBlog Post: Updated patch sets now available for Water, Storm & Sewer products...
The most current patch sets for the products listed below are now available to download from the "SELECT Released Products" section of SELECT Downloads webpage. Note that these patch sets must be...
View ArticleForum Post: Updated patch sets now available for Water, Storm & Sewer...
The most current patch sets for the products listed below are now available to download from the "SELECT Released Products" section of SELECT Downloads webpage. Note that these patch sets must be...
View ArticleForum Post: RE: Isolated Tank in HAMMER
Thank you Scott. Your suggestions were very helpful I was able to fix the error by checking the initial conditions.
View ArticleWiki Page: Performing a silent installation for Bentley's Water products
Applies To Product(s): WaterGEMS, WaterCAD, HAMMER, StormCAD, SewerCAD, SewerGEMS, CivilStorm, Flowmaster, CulvertMaster Version(s): Various Environment: N/A Area: Installation...
View ArticleForum Post: RE: Insert image background in existing WaterCAD model
To expand on what Rob said, here's a video showing how I would import a Google Earth image into WaterGEMS. (You'll need to watch this in full screen mode in order to see it clearly) (Please visit the...
View ArticleForum Post: RE: system head curve
Dears, I posted the model with the problem description on the server.
View ArticleForum Post: RE: system head curve
Dears , I have another inquiry. When the program calculate the system head curve for ;Does it start calculating directly from downstream of the selected pump ? to the farest point ? in case of a...
View ArticleWiki Page: How to manual generate a system head curve (Solution 500000058706)
Applies To Product(s): Bentley WaterCAD, Bentley WaterGEMS Version(s): N\A Environment: N\A Area: Modeling Subarea: N\A Original Author: Bentley Technical Support Group...
View Article