Quantcast
Channel: OpenFlows | Water Infrastructure
Browsing all 39611 articles
Browse latest View live
↧

Forum Post: RE: Is there a way to model a surface above a structure in StormCAD

To add to Mark's answer, the Surface Storage options available with the Implicit and SWMM solvers in SewerGEMS and CivilStorm provide an option to define with a depth-area curve, but you'll need to...

View Article


Forum Post: RE: Export Shapefile of Network using WaterObjects

Bruce, I will check with some of our developers for ideas on why this is happening. In the meantime, it may help to try creating a smaller demo project for the shapefile export and get things working...

View Article


Forum Post: Hammer surge control

For surge control of pumping main pipeline , where I can define zero velocity valve and Air cushion valve. Is there any provision is there in Hammer software.

View Article

Forum Post: RE: Hammer surge control

Hello, Here is the similar discussion on forum about modeling zero velocity valve in Hammer. About modeling air valves, the below technote you may find useful.

View Article

Forum Post: How to name(number) the junctions and pipes to follow the general...

I have designed a distribution network in WaterGEMS V8i for which pipe and junction data was imported from a .dxf file. During the import, the junctions (and pipes) were named randomly, where J-2 does...

View Article


Wiki Page: Compatibility Chart [TN]

Applies To Product(s): WaterCAD, WaterGEMS, PondPack, StormCAD, SewerCAD, FlowMaster, CulvertMaster, Hammer, SewerGEMS, CivilStorm Version(s): Various Environment: N/A Area: General Subarea: N/A...

View Article

Forum Post: RE: Adding profile of long pipeline into WaterCAD or HAMMER

Hello Ahmed, If this is an existing model, you may need to simplify the model. HAMMER has a tool called Skelebrator which help with this function. There is detailed information on how to use...

View Article

Wiki Page: Sorting and relabeling a flextable based on upstream-downstream order

Applies To Product(s): Bentley WaterGEMS, WaterCAD, HAMMER, StormCAD, SewerCAD, SewerGEMS, CivilStorm Version(s): 08.11.XX.XX Environment: N/A Area: Output and Reporting Subarea: Original Author: Jesse...

View Article


Forum Post: RE: How to name(number) the junctions and pipes to follow the...

Hello Pankhuri, The following link should be of some use to you in relabeling the elements in your model:...

View Article


Forum Post: RE: Export Shapefile of Network using WaterObjects

Jesse, Your idea of creating a demo project was a good one. I added the following event handler to my existing project to see if I could isolate the problem. I ran it and am still coming up with an dbf...

View Article

Forum Post: RE: Export Shapefile of Network using WaterObjects

Hi Bruce, I took a few minutes and looked at your code. I have some comments. I have no tried these ideas so they may or may not work but it's worth a shot. VB.Net has the ability to use either 0 or...

View Article

Forum Post: RE: Export Shapefile of Network using WaterObjects

I don't think you're right about the Visual Basic arrays. That's actually how they're defined. They have zero based indices, but you indicate the maximum index value when you create the array. I took...

View Article

Forum Post: The total catchment area exceeds the total combined area. Select...

Hello, I have a stormCAD model that I can not get to validate or run because every time I do I get the following error: "The total catchment area 2,676.0 ft² exceeds the total combined area 2,676.0...

View Article


Wiki Page: How to resolve the user notification: Gravity sub-network has more...

Applies To Product(s): Bentley SewerCAD, Bentley SewerGEMS Version(s): 08.11.xx.xx Environment: N/A Area: Modeling Subarea: Original Author: Scott Kampa, Bentley Technical Support Group Problem...

View Article

Forum Post: A User notification message in HAMMER

Dear All, I have an message in my User notification window which I could not understand. It says "The root sought in BISECT is not sufficiently close to the estimated root at time step 400. Please...

View Article


Forum Post: Difference between running EPS and Transit for the same time period

Dear All, I want to understand the difference of running a transit analysis simulation for any model and the EPS for the same time. In my thought it is the same but what I am getting is not. Please...

View Article

Forum Post: SewerGems

Hi Dear, We are working to develop a model for foul network of length about 122 kilometers. We have this licensed software installed in our company Ch2m Middle east UAE. Major issue in the model is the...

View Article


Forum Post: What is the difference between the working phenomena of a vented...

Dear All, What is the difference between the working phenomena of a vented vessel and air valve . It seems that they are exactly the same. Then what is the purpose of this type of vessels.

View Article

Forum Post: RE: A User notification message in HAMMER

Hello Ahmed, The following link has information on this issue: communities.bentley.com/.../14752.the-root-sought-in-bisectwin-is-not-sufficiently-closed-to-the-estimated-root-solution-500000076138 In...

View Article

Forum Post: RE: A User notification message in HAMMER

This is a generic error that can occur in a number of different situations. It could be due to a data entry error causing the transient results to become unstable. The first step would be to check all...

View Article
Browsing all 39611 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>