Forum Post: RE: Age ( maximum) and Travel Time
That's a very good question and most of the time you will find a very good explanation in Water Quality books. So, I encourage you to go through some of the books to fully understand the nature....
View ArticleForum Post: RE: Dual pipes in a link with different slopes
I've attached an example model that I had set up a few years ago to demonstrate "stacked" parallel pipes (different inverts) with the Implicit dynamic solver. You should be able to open this in older...
View ArticleForum Post: RE: Flushing II (Pipe Run)
Hello Wow, It was just a mistake. Forgive me and thank you very much. Sim
View ArticleWiki Page: After computing a model with the SWMM solver, what does the...
Applies To Product(s): Bentley SewerGEMS, Bentley CivilStorm Version(s): 08.11.03.84 Environment: N\A Area: Calculations Subarea: N\A Original Author: Scott Kampa, Bentley Technical Support Group...
View ArticleForum Post: Changing units format in FlexTable (StormCAD)
Is there a way to change the units format in FlexTable? I had created a field from user data extensions and tried to set the format like station format "0+00.00" without success.
View ArticleForum Post: RE: Changing units format in FlexTable (StormCAD)
Not sure if I fully understand your second part but try right clicking on a column header of a Field that has a unit and then click Units and Formatting. This will bring up a window like below which...
View ArticleForum Post: RE: Changing units format in FlexTable (StormCAD)
No, it's not what I want. I know how to change the units format as you showed above. What I wanted is to have the similar format like Field called Station "0+00.00". You can not change in that "set...
View ArticleForum Post: RE: Changing units format in FlexTable (StormCAD)
Hi Nigel8, Edit the Tools User Data Extension you defined. If you are using the Length Dimension, then you can change it to use "Station" as the Numeric Formatter. Best regards, Rob.
View ArticleForum Post: RE: Changing units format in FlexTable (StormCAD)
Thanks, got it right. One more thing, is it possible to show the field : "Station(calculated)" in 2-Row FlexTable??
View ArticleForum Post: Adding a field in 2-Row FlexTable (StormCAD)?
Is it possible to show the field : "Station(calculated)" in 2-Row FlexTable where the field is the element from catch basins??
View ArticleWiki Page: WaterGEMS/HAMMER/SewerGEMS toolbars not available in ArcGIS...
Applies To Product(s): Bentley WaterGEMS, SewerGEMS, HAMMER Version(s): 08.11.xx.xx Environment: ArcGIS Area: Installation Subarea: Original Author: Scott Kampa, Bentley...
View ArticleForum Post: RE: CivilStorm and Geopak/Inroads compatibility
Hello, We are continually working on the integration between CivilStorm/StormCAD and the Bentley civil products (including GEOPAK). However, for now, I expect that CivilStorm or StormCAD by themselves...
View ArticleForum Post: RE: CivilStorm and Geopak/Inroads compatibility
Ok. Thanks for the response. We'll likely just stick with Geopak Drainage unless we need something specific. My recommendation is make the functionality similar in that we can place custom inlets,...
View ArticleForum Post: Trex error message
I am currently creating a model and would like to assign elevations. I noticed Trex allows us to do so. I have a contour shapefile taken from Arcgis data. It is from the same source I created the...
View ArticleForum Post: RE: Adding a field in 2-Row FlexTable (StormCAD)?
Hello Nigel, Below is an excerpt from the StormCAD documentation regarding the currently available fields that can be displayed in two rows, in a 2-row Flextable. The other fields that you can add are...
View ArticleForum Post: RE: Trex error message
Hi, It's hard to say the issue without looking at the error but the source file might be too big for TRex. What I generally do is using a "Pump Station*" element, I draw a polygon around my network so...
View ArticleForum Post: RE: Adding a field in 2-Row FlexTable (StormCAD)?
Hi Nigel, With the Network Elements Table, you can display the ground and invert elevations of the stop nodes on the rows representing conduits: "Elevation Ground (Start)", "Elevation Ground (Stop)",...
View Article