Forum Post: Re: Connecting Model Elements
Ben,again thanks very much for the help! That worked perfectly.
View ArticleClik here to view.
Wiki Page: How to model a bridge scupper
Applies To Product(s):CivilStorm Version(s):08.11.XX.XX Environment: N/A Area: Modeling Subarea: Original Author:Jesse Dringoli, Bentley Technical Support Group How do I model a bridge...
View ArticleForum Post: Re: Load building - keeping water meter number
Thanks Ben, the HMINodeID is very useful, I can solve my problem now. Thanks for taking the time to help me out.
View ArticleForum Post: Re: WaterCAD Calibration
Hello Yoko,We would need to see the model in order to look into this further. You can use the directions at the following link to securely upload the model:...
View ArticleForum Post: Modelling a Pelton
I am modelling a hydro station with 4 pelton units for pressure rise and mass surge.I have currently modelled these as a discharge to atmosphere element as is recommended in the Hammer knowledge base....
View ArticleForum Post: Re: Update Labels of a Hydraulic Model using WaterObjects.NET
Very nice. Here's a related technote on the subject of submodels:communities.bentley.com/.../4539.aspx
View ArticleClik here to view.
Wiki Page: Using Turbines in Bentley HAMMER
Applies To Product(s):Bentley HAMMER Version(s):V8i or V8 XM Environment: N/A Area: Modeling Subarea: N/A Original Author:Scott Kampa, Bentley Technical Support Group OverviewThe...
View ArticleForum Post: Re: Modelling a Pelton
Yes - in this case the TCV represents the Pelton/Impulse turbine's valve. Since the downstream side of the valve discharges directly to the atmosphere, the Discharge To Atmosphere node (D2A) in this...
View ArticleForum Post: Re: Steady-State Sewer Model
Just to try to get the conversation started here...Steady state is useful for looking at the capacity of the system to handle peak flow. For example, users can use the automated design feature, in...
View ArticleClik here to view.
Wiki Page: "COM Error Not Documented" when opening product
Applies To Product(s):Bentley SewerGEMS, Bentley SewerCAD, Bentley StormCAD, Bentley CivilStorm, Bentley WaterGEMS, Bentley WaterCAD, Bentley HAMMER Version(s):08.11.03.77 (for Storm and Sewer...
View ArticleClik here to view.
Wiki Page: How to open .fm2 FlowMaster files in FlowMaster 2005 or newer version
Applies To Product(s):Bentley FlowMaster Version(s):08.11.01.03 Environment: N/A Area: Other Subarea: Original Author:Terry Foster, Bentley Technical Support Group Problem DescriptionHow...
View ArticleClik here to view.
Wiki Page: Flowmaster - "Arithmetic operation resulted in overflow." when...
Applies To Product(s):Bentley FlowMaster Version(s):08.11.01.03 Environment: N/A Area: Other Subarea: Original Author:Dan Iannicelli, Bentley Technical Support Group Problem...
View ArticleClik here to view.
Wiki Page: WaterGEMS for ArcMap 10.1 "OhShutdown: COM obejct has been...
Applies To Product(s):Bentley WaterGEMS Version(s):08.11.04.50 Environment: ArcMap 10.1 Area: Modeling Subarea: Original Author:Mark Pachlhofer, Bentley Technical Support Group Error or...
View ArticleForum Post: StormCAD Catchment Table
I am preparing StormCAD Catchment data summary tables and it appears that further data should be available to include. I can enter information to calculate Tc and runoff coefficients in the...
View ArticleClik here to view.
Wiki Page: Large number of output files being saved
Applies To Product(s):Bentley WaterGEMS, Bentley WaterCAD Version(s):08.11.XX.XX Environment: N/A Area: Output and Reporting Subarea: Original Author:Jesse Dringoli, Bentley Technical Support...
View ArticleClik here to view.
Wiki Page: Modifying and adding entries to Engineering Libraries
Applies To Product(s):Bentley WaterGEMS, Bentley WaterCAD, Bentley HAMMERBentley SewerGEMS, Bentley CivilStorm, Bentley StormCADBentley SewerCAD, Bentley PondPack Version(s):08.11.XX.XX...
View ArticleClik here to view.
Wiki Page: Detaching a Haestad product model within the Microstation...
Applies To Product(s):Bentley StormCAD, Bentley WaterCAD, Bentley WaterGEMS, Bentley SewerGEMS, Bentley CivilStorm, Bentley PondPack, Bentley SewerCAD Version(s):08.11.03.77 Environment:...
View ArticleClik here to view.
Wiki Page: Getting error upon opening existing SewerCAD model
Applies To Product(s):Bentley SewerCAD Version(s):08.11.XX.XX Environment: N/A Area: Other Subarea: Original Author:Terry Foster, Bentley Technical Support Group Error or Warning...
View ArticleClik here to view.
Wiki Page: Modelbuilder for WaterGEMs for ArcMap only creates one pipe
Applies To Product(s):Bentley WaterGEMS Version(s):08.11.04.50 Environment: ArcMap, ArcGIS Area: Layout and Data Input Subarea: Original Author:Mark Pachlhofer, Bentley Technical Support Group...
View ArticleForum Post: Re: Error message in HAMMER related to Surge Tank
Hello Amits,I went ahead and split your original thread, since this is a new issue. Generally we recommend posting one topic per thread, to make things easier to read and search for.Regarding the "root...
View Article