Wiki Page: Rise and Depth/Rise do not appear correct for a channel
Product(s): CivilStorm, SewerGEMS Version(s): 10.00.00.40 Area: Calculations Problem The calculated Depth/Rise property in a Channel link element does not appear to be correct when compared to a...
View ArticleWiki Page: Error when importing a .DXF file with ModelBuilder "Attempted to...
Product(s): WaterGEMS, WaterCAD, HAMMER, SewerGEMS, SewerCAD, StormCAD, CivilStorm, PondPack Version(s): 08.11.XX.XX and 10.00.XX.XX Area: Input and Data Layout Problem When importing a DXF file using...
View ArticleWiki Page: Volume into pond greater than volume out
Product(s): Bentley PondPack Version(s): 08.11.XX.XX Area: Output and Reporting Problem Why is the flow volume into the pond greater than the flow volume out of the pond if there is no infiltration?...
View ArticleWiki Page: "... Stopped Working" error when opening product
Applies To Product(s): WaterGEMS, WAterCAD, StormCAD, SewerGEMS, SewerCAD, CivilStorm Version(s): 08.11.xx.xx Area: Installation Original Author: Jesse Dringoli, Bentley Technical Support Group Problem...
View ArticleWiki Page: Error opening model: "ArgumentException: Adding Duplicate"
Product(s): Bentley SewerGEMS, Bentley CivilStorm, Bentley StormCAD, Bentley SewerCAD Version(s): 08.11.xx.xx Environment: N\A Area: Modeling Problem When trying to open a StormCAD, SewerCAD, SewerGEMS...
View ArticleForum Post: RE: CivilStorm model will not open after compacting database
Gary, The wiki link below has information that addresses this error message. First you can try to manually compact the database and if that doesn't work try restoring a backup copy of the database...
View ArticleWiki Page: When updating the color coding in SewerGEMS for ArcGIS "Depth/Rise...
Applies To Product(s): Bentley SewerCAD Version(s): 08.11.00.52 Area: Output and Reporting Original Author: Scott Kampa, Bentley Technical Support Group Problem In trying to update the color coding in...
View ArticleWiki Page: How does the Interconnected Pond Modeling (ICPM) algorithm work in...
Product(s): PondPack Version(s): 08.11.xx.xx, 10.xx.xx.xx Area: Modeling Problem How does the Interconnected Pond Modeling (ICPM) algorithm work in PondPack? Solution Basically, it is a convergent...
View ArticleWiki Page: How do I solve the ICPM convergence problems in Pondpack?
Product(s): PondPack Version(s): 08.11.xx.xx, 10.xx.xx.xx Area: Modeling Problem When I run my model that uses ICPM, I encounter warning messages about not being able to converge. How can I fix these?...
View ArticleForum Post: initial pressure less than vapor pressure - previously proposed...
Working on simulating a proposed RWPS that draws water from a wet well via (6) (25 MGD each) vertical turbine pumps that discharge flow to a reservoir. The goal is to assess surge appurtenances for a...
View ArticleWiki Page: Catchment user notification about the difference between the...
Applies To Product(s): CivilStorm, SewerGEMS, PondPack Version(s): 10.00.xx.xx, 08.11.XX.XX Area: Output and Reporting Original Author: Mark Pachlhofer, Bentley Technical Support Group Problem...
View ArticleWiki Page: PondPack user notification: Computation increment, Tm, is greater...
Product(s): Bentley PondPack Version(s): 08.11.01.xx Area: Modeling Problem What does the following user notification mean? I can't change the Tc of the catchment in question. What should I do? "Tm...
View ArticleWiki Page: Can you user ModelBuilder's sync out function to update a DXF file?
Applies To Product(s): Bentley WaterCAD Version(s): 10.00.xx.xx, 08.11.xx.xx Area: Modeling Original Author: Mark Pachlhofer, Bentley Technical Support Group Problem Can you use ModelBuilder's sync out...
View ArticleWiki Page: Operating rule not being following after computing pump shutdown...
Applies To Product(s): Bentley HAMMER Version(s): 08.11.xx.xx Area: Modeling Original Author: Scott Kampa, Bentley Technical Support Group Problem After computing a pump shutdown or start-up in HAMMER,...
View ArticleWiki Page: User Notification, "The culverts outlet coefficients are to be...
Product(s): SewerGEMS, CivilStorm, StormCAD, SewerCAD Version(s): 08.11.XX.XX, 10.XX.XX.XX Area: Output and Reporting Problem User Notification, "The culverts outlet coefficients are to be defined by...
View ArticleWiki Page: How do you change the display precision for element properties?
Product(s): CivilStorm, SewerCAD, SewerGEMS, StormCAD, WaterCAD, WaterGEMS, HAMMER Version(s): 10.00.00.00, 08.xx.xx.xx Area: Modeling Problem How do you change the display precision for an element...
View ArticleWiki Page: When I import demands using ModelBuilder it rounds the values to...
Applies To Product(s): WaterGEMS, WaterCAD, HAMMER Version(s): 10.00.xx.xx, 08.11.xx.xx Area: Modeling Original Author: Nancy Mahmoud, Bentley Technical Support Group Problem When I import demands...
View ArticleWiki Page: What is the difference between WaterCAD and WaterGEMS?
Applies To Product(s): WaterGEMS, WaterCAD Version(s): V8i, CONNECT Edition Original Author: Mark Pachlhofer, Bentley Technical Support Group Problem What is the difference between WaterCAD and...
View ArticleWiki Page: [Deleted] What are the differences and similarities between...
Applies To Product(s): Bentley WaterCAD, Bentley WaterGEMS Version(s): 08.11.XX.XX Environment: N/A Area: Other Subarea: Original Author: Mark Pachlhofer, Bentley Technical Support Group What are the...
View Article