Wiki Page: How do I activate a GEOPAK license inside StormCAD for MicroStation?
Applies To Product(s): Bentley StormCAD Version(s): 08.11.xx.xx Environment: N/A Area: Installation Subarea: Original Author: Scott Kampa, Bentley Technical Support Group Problem Description How do I...
View ArticleWiki Page: Best practices for working with GEOPAK drainage files exported...
Applies To Product(s): Bentley StormCAD, OpenRoads Version(s): 08.11.04.54+ (StormCAD), SELECTseries 4+ (OpenRoads Environment: N/A Area: Output and Reporting Original Author: Jesse Dringoli, Bentley...
View ArticleWiki Page: Problems opening GEOPAK Drainage file exported from StormCAD
Applies To Product(s): Bentley StormCAD Version(s): 08.11.04.54 Environment: N/A Area: Output and Reporting Original Author: Jesse Dringoli, Bentley Technical Support Group Problem When exporting my...
View ArticleForum Post: Topology-Connect to existing system
Hi I am going to connect the new system ( white lines) to the existing system (red line). Firstly, I have to analyse the existing system, Secondly, I should design the new system and finally , I should...
View ArticleForum Post: RE: Invert in & Invert out label in the manholes-SewerGEMS
You'll need to use selection sets to do this. For example MH-10 would be excluded in the selection set used in the annotation for Invert In 1, 2 and 3. MH-6 would be excluded from the selection set...
View ArticleWiki Page: In the water products, junctions appear to overlay a pipe instead...
Applies To Product(s): Bentley WaterGEMS, Bentley WaterCAD, Bentley HAMMER Version(s): 08.11.xx.xx Environment: N/A Area: Modeling Subarea: Original Author: Scott Kampa, Bentley Technical Support Group...
View ArticleForum Post: RE: Topology-Connect to existing system
Hi hamid I think I find out the way to help you by 1- go to analyses the existing system 2- drawn the new system and join to the existing system 3- make calculation type to design to whole system 4-...
View ArticleForum Post: RE: Bently PondPack V8i Problem - Adding engineering library from...
Hello TimZ, I did a quick test with a sample model and it seemed to work okay for me. The first thing I would do is make sure you have the latest version of PondPack, just to make sure you are...
View ArticleForum Post: RE: Invert in & Invert out label in the manholes-SewerGEMS
Hello Hamid, You can make a selection set a number of different ways, such as by going to View > Selection Set. You can also select all of the elements you want to include in the selection set, then...
View ArticleForum Post: RE: Bently PondPack V8i Problem - Adding engineering library from...
(Please visit the site to view this file) Attached is the Zip. The .xml is called Chester County Rainfall Curve. As far as I know, my PondPack is up to date. It was patched on April 20th to update it...
View ArticleWiki Page: Importing storm data and other library information from older...
Applies To Product(s): Bentley PondPack Version(s): 08.11.XX.XX Environment: N/A Area: Layout and Data Input Subarea: Original Author: Jesse Dringoli, Bentley Technical Support Group How can I import...
View ArticleForum Post: RE: Bently PondPack V8i Problem - Adding engineering library from...
Hello TimZ, When I try to import the XML file into PondPack's Engineering Library from ProjectWise, I get an error message that says: "The source is of a different engineering library type than...
View ArticleWiki Page: What's New in StormCAD SELECTseries 5
Applies To Product(s): Bentley StormCAD Version(s): V8i SELECTseries 5 (08.11.05.58) Environment: N/A Area: N/A Subarea: N/A Original Author: Terry Foster, Bentley Technical Support Group Overview The...
View ArticleWiki Page: What's New in SewerCAD SELECTseries 5
Applies To Product(s): Bentley SewerCAD Version(s): V8i SELECTseries 5 (08.11.05.58) Environment: N/A Area: N/A Subarea: N/A Original Author: Terry Foster, Bentley Technical Support Group Overview The...
View ArticleWiki Page: The number of active elements in your model exceeds the number of...
Applies To Product(s): Bentley WaterCAD, Bentley WaterGEMS, Bentley SewerGEMS, Bentley StormCAD, Bentley SewerCAD, Bentley PondPack, Bentley CivilStorm Version(s): 08.11.XX.XX Environment: N/A Area:...
View ArticleWiki Page: Index was outside the bounds of the array error in the Thiessen...
Applies To Product(s): Bentley WaterCAD, Bentley WaterGEMS Version(s): 08.11.03.17 Environment: N/A Area: Calculations Subarea: Original Author: Mark Pachlhofer, Bentley Technical Support Group Problem...
View ArticleWiki Page: Understanding the Modified Rational Method
Applies To Product(s): CivilStorm, PondPack, SewerGEMS, SewerCAD Version(s): V8i Environment: N/A Area: Modeling Subarea: N/A Original Author: Jesse Dringoli, Bentley Technical Support Group Overview...
View ArticleForum Post: RE: Bently PondPack V8i Problem - Adding engineering library from...
The .xml File was created by doing the usual steps when creating a rainfall distribution curve. In my PondPackV8i model, I go to components -> Storm Data. There I created a new Time-Depth using a...
View ArticleForum Post: RE: Invert in & Invert out label in the manholes-SewerGEMS
Thanks for your response, but, it still needs to spend time to select manually - one by one- for the manhole which have Elevation invert 1 , 2 , 3 and 4. I recommend you to include it into the next...
View ArticleForum Post: RE: Topology-Connect to existing system
Thanks Terry for the response Actually, I know how topology works, but, for this specific network, please let me know more how to model the third topology which is a combination of two other...
View Article
