Wiki Page: The footer of the reports generated in Flowmaster is overlapping...
Applies To Product(s): Bentley FlowMaster Version(s): 08.11.01.03 Environment: N\A Area: Modeling Subarea: N\A Original Author: Scott Kampa, Bentley Technical Support Group Problem The footer of the...
View ArticleWiki Page: How are "pipe sets" and "nodes of interest" used in a flushing...
Applies To Product(s): Bentley WaterGEMS, Bentley SewerGEMS, Bentley CivilStorm, Bentley StormCAD, Bentley PondPack, Bentley SewerCAD, Bentley HAMMER, Bentley WaterCAD Version(s): 08.11.XX.XX...
View ArticleForum Post: RE: Pipe Geometry
MPachlhofer, I understand the capability of the profile functions and I have the annotation as in your screen shot but that is not customization to display other parameter and change arrangement, and...
View ArticleComment on Exporting model file into a readable formal for AutoCAD Civil3D or...
I did export LandXML file from sewercad; but when I imported it to Civil3D I got Manholes only imported and many messages for the pipes and the pipes are missing and here example message of the pipes I...
View ArticleForum Post: Time tolerance in Initial Setting Import -tool
Hello, I'm testing the Initial Settings Import -tool in SCADAConnect simulator. I have the metering results of tank level from every 15 minutes (Excel) and I have made a SCADA Signal connection to the...
View ArticleForum Post: RE: Pipe Geometry
Mohamad, Currently, the only way to do what you are asking is to open the software in the AutoCAD interface and export the profile to the drawing. This is probably what you were doing in Civil 3D.
View ArticleForum Post: RE: Gutter Velocity
If you're using StormCAD or the GVF Rational solver in SewerGEMS or CivilStorm, the velocity result is not applicable for a gutter. Bypass flow from an upstream catchbasin will pass directly to the...
View ArticleWiki Page: Can I restore a backup of my projects?
Applies To Product(s): Bentley WaterGEMS, Bentley WaterCAD, Bentley HAMMER, Bentley SewerGEMS, Bentley SewerCAD, Bentley StormCAD, Bentley CivilStorm, Bentley FlowMaster, Bentley CulvertMaster...
View ArticleForum Post: RE: Time tolerance in Initial Setting Import -tool
Hi Ulla, The time tolerance setting in the new SCADAConnect is currently working as follows. If you specify a tolerance of 5 minutes, then for a requested time of 00:15:00, the time range 00:10:00 to...
View ArticleForum Post: RE: Pipe Geometry
Mohamad, For the profile issue, I have filed a feature request with our developers for their consideration.
View ArticleWiki Page: How do you troubleshoot large SewerGEMS or CivilStorm models when...
Applies To Product(s): Bentley SewerGEMS, Bentley CivilStorm Version(s): 08.11.XX.XX Environment: N/A Area: Original Author: Mark Pachlhofer, Bentley Technical Support Group Problem How do you...
View ArticleWiki Page: What is the difference between the Hydraulic Grade and Energy...
Applies To Product(s): Bentley SewerGEMS, Bentley CivilStorm, Bentley StormCAD Version(s): 08.11.XX.XX Environment: N/A Area: Original Author: Mark Pachlhofer, Bentley Technical Support Group Problem...
View ArticleWiki Page: Hydraulic grade discontinuity at steep pipes or across nodes...
Applies To Product(s): Bentley StormCAD Version(s): 08.11.03.83 Environment: N/A Area: Calculations Subarea: Original Author: Terry Foster, Bentley Technical Support Group Why do I see a jump in the...
View ArticleForum Post: RE: Time tolerance in Initial Setting Import -tool
Adding an additional comment about the graph, but rather than editing the original post, I figured I would add a new reply, since it's additional information not really required for the original...
View ArticleForum Post: Invert in & Invert out label in the manholes-SewerGEMS
Hi as far as I understood, for the "invert in" label I should use "Elevation(invert1,2,3,....) and for "invert out" I can use "Elevation (invert)". but I don't want to see invert in as (N/A) where...
View ArticleWiki Page: Max pressure value in properties different from graph (Solution...
Applies To Product(s): Bentley HAMMER Version(s): 08.11.04.50 Environment: N\A Area: Output and Reporting Subarea: N\A Original Author: Scott Kampa, Bentley Technical Support Group Problem The maximum...
View ArticleForum Post: RE: Invert in & Invert out label in the manholes-SewerGEMS
Are you using the GVF Convex numerical solver? Are you adding these fields to the node flextable? When you say that you do not want to see the "N/A" show up, what exactly do you want to happen? (do you...
View ArticleForum Post: RE: Invert in & Invert out label in the manholes-SewerGEMS
Hi Jesse Thanks for your follow up I am using GVF Convex and just created some labels in "Element Symbology" I want to software automatically delete those "N/A" labels and shift the next label up! E.g...
View ArticleWiki Page: WaterGEMS For ArcGIS [FAQ]
Applies To Product(s): Bentley WaterGEMS, Bentley SewerGEMS Version(s): V8 XM and V8i Environment: ArcGIS Area: N/A Subarea: N/A Original Author: Jesse Dringoli, Bentley Technical Support Group How do...
View Article
