Forum Post: RE: Unexplainable Results of Modeling AVs in Hammer
The velocity profile shows the maximum (red line) and minimum (green line) velocity over the length of the profile. If you have the calculation option set to generate animation data, you can navigate...
View ArticleWiki Page: System head curves with no downstream storage (Solution 500000056093)
Applies To Product(s): Bentley WaterGEMS, Bentley WaterCAD Version(s): N\A Environment: N\A Area: Calculations Subarea: N\A Original Author: Jesse Dringoli, Bentley Technical Support Group Problem In a...
View ArticleForum Post: RE: Importing Customer Meter Info into WaterGEM for ArcGIS - How...
RE: http://communities.bentley.com/products/hydraulics___hydrology/f/5925/t/102522 My computer has 64-bid operation system. However, the Microsoft office products installed are the 32-bid version. When...
View ArticleForum Post: RE: RE: Importing Customer Meter Info into WaterGEM for ArcGIS -...
Hello Yoko, The file path mentioned in the message you received (C:\Program Files (x86)\Bentley\WaterGEMS\WaterGEMS.exe) is the 32-bit version. This can be confirmed by looking at the Welcome dialog...
View ArticleForum Post: RE: Unexplainable Results of Modeling AVs in Hammer
Thanks Jesse, Your reply helped a lot explaining the pipeline behavior shown in my post. Let me itimise the conversation as follows: 1- Yes, the pipe diameter is the same along the entire length of the...
View ArticleForum Post: RE: Modeling Large Development with Multiple Connections.
Jesse, Thank you for your reply on the water modeling set up. We are developing a 180 acre multiuse site in a downtown area. Therefore, we will have a demand for the whole site around 1800 gpm. I have...
View ArticleForum Post: RE: Modeling Large Development with Multiple Connections.
When you are working with a 1800 gpm demand and multiple interconnections, you really can't separate the development site from the rest of the system and expect to get accurate results. The...
View ArticleForum Post: How to edit pipe lengths in StormCAD
I'm attempting to edit a existing StormCad model that was probably created from a .dxf file. ( I didn't create the original model) I'd like to edit some of the pipe lengths between the structures and...
View ArticleForum Post: RE: How to edit pipe lengths in StormCAD
You can set "Has User Defined Length?" to True and then enter the length in the field "Length (User Defined)".
View ArticleForum Post: RE: How to edit pipe lengths in StormCAD
So I'm guessing that the model will utilize the user defined length as long as the variable is set to true even though the displayed length does not change?
View ArticleForum Post: RE: How to edit pipe lengths in StormCAD
When you say displayed length, do you mean the annotation? The annotation may need to be edited. If it is set to display "Length (Scaled), it will not update. You will need to check what field the...
View ArticleForum Post: RE: How to edit pipe lengths in StormCAD
I'm referring to the layout display in the drawing pane. When I enter a user defined length it does not change the display in the drawing pane.
View ArticleForum Post: RE: How to edit pipe lengths in StormCAD
When you use a "use defined length", the pipe does not "stretch" in the drawing. When you use a user defined length, the drawing is no longer to scale but is a schematic drawing. The degree to which...
View ArticleForum Post: RE: How to edit pipe lengths in StormCAD
As I said, once you use a user defined length, you no longer have a scaled drawing. The length in the hydraulic calculation no long is the same as that in the drawing. If the model tried to change the...
View ArticleForum Post: File format conversion error (*.mdb to *.sqlite)
How do I resolve this error?
View ArticleForum Post: RE: File format conversion error (*.mdb to *.sqlite)
We may need more information on this issue. What version the model you are trying to open is saved in? To see model is saved in which version of WaterGEMS, please right click on the .wtg file>open...
View ArticleForum Post: Serious Error 51007 SewerGEMS - Pipe/channel networks must end...
Hi I had seen a similar issue on the forum but the information did not help with my issue- http://communities.bentley.com/products/hydraulics___hydrology/f/5925/t/98342. My model was working but now...
View ArticleForum Post: RE: Serious Error 51007 SewerGEMS - Pipe/channel networks must...
If that forum post didn’t help you then , please upload your model so that we can look into the issue. There are two options for sharing your model files on BE Communities. If you would like the files...
View ArticleForum Post: RE: File format conversion error (*.mdb to *.sqlite)
Here is a related Support Solution on this issue:...
View ArticleForum Post: How to accurately model a culvert in PondPack V8i
Hello all, I am in the process of refining some of my models and I was wondering what is the most accurate way of modeling a typical culvert that diverts a stream under a road? For example, lets say I...
View Article