Forum Post: RE: PDD vs DDA in WaterGEMS
Hello Zaman, Can you share some details of the pump curve? Or any error messages you might be getting which shows its not working as expected? As my colleague pointed out before in DDA analysis the...
View ArticleWiki Page: Monitoring License Usage - Subscription Entitlement Service...
Product(s): WaterGEMS, WaterCAD, HAMMER, SewerGEMS, SewerCAD, StormCAD, CivilStorm, PondPack, FlowMaster, CulvertMaster Version(s): 10.02.00.XX and greater Area: Licensing Problem How can I monitor...
View ArticleForum Post: Labels Orientation
Hello everyone, I'm using sewergems connect edition and I have a problem in the orientation of the labels, as shown below the label for some pipe on right and some on left, How can I unit the side of...
View ArticleForum Post: RE: Labels Orientation
Hello Hamza, Whenever you a layout a conduit in SewerGMES, label by default appears on left side of conduit i.e. upper side not lower by default. However if for some reason the labels are not on same...
View ArticleWiki Page: Error when using Bentley Bing Map key
Product(s): WaterGEMS, WaterCAD, SewerGEMS, CivilStorm, SewerCAD, StormCAD, Hammer Version(s): 10.02.XX.XX Area: Layout and Data Input Problem When using Bentley Bing Map key following error is seen,...
View ArticleForum Post: RE: Question about WaterGEMS connect edition
Thank you for quick reply. I compare the scenario and found the discrepancy. I forgot to input the ground storage tank a negative demand. After I did this, I saw the flow supplied in the summary.
View ArticleForum Post: RE: WaterGEMS Darwin Calibrator how to find locations of valve...
When I look at the Example #5, hydrant flushing are set at junctions instead of hydrants. If I set the Darwin calibration using hydrants, when it simulates multiple flow tests, would it open the...
View ArticleForum Post: Object Reference Not Set to An Instance of An Object Issue and...
Hi everyone, I'm searching for help! I got this message shown when i try to validate not just one but multiple different models. I have read other thread in the past about compacting database and look...
View ArticleForum Post: RE: Object Reference Not Set to An Instance of An Object Issue...
Hi Amy Benson, What version of OpenFlows SewerGEMS are you running? Here is a Wiki article to help you - How can I find my registration / license information and version / build number for my...
View ArticleForum Post: WATERGEMS
Dear all, water gems file has these files, and the watergems program shows this message
View ArticleForum Post: RE: WaterGEMS Darwin Calibrator how to find locations of valve...
Hello Yoko, In Example5.wtg, all nodes happen to be junctions. If you have hydrants in your model that represent where the flow test is taking place, you can use these. If you open the hydrant to do...
View ArticleForum Post: RE: WATERGEMS
Hi Moustafa Darweesh, What version of OpenFlows WaterGEMS are you running? Here is a Wiki article to help you - How can I find my registration / license information and version / build number for my...
View ArticleWiki Page: Using Downstream Trace and Digital Terrain Models
Product(s): StormCAD, SewerGEMS, CivilStorm, SewerCAD Version(s): CONNECT Edition, V8i SELECT Series 4 (08.11.04.54) and later Area: Modeling Background The ability to attach Digital Terrain Models and...
View ArticleForum Post: RE: Import AutoCAD file in SewerGems - Terrain Model
Additionally - I see you mentioned that you need to use the contour to build your" watershed area contribution". See the following article for how a DXF version of your AutoCAD file can be used created...
View ArticleWiki Page: LandXML Terrain Model does not obey boundary lines
Product(s): StormCAD, SewerGEMS, CivilStorm Version(s): 10.00.00.40 Area: Layout and Data Input Problem When using a LandXML file in the Terrain Model tool, the boundary lines are not respected....
View ArticleForum Post: RE: Designer Engine Error Message
Hello Carlos, Do you receive this error for Darwin Scheduler for a single model or for multiple models? Can you please try to compact database to see if that helps? File>Database...
View ArticleForum Post: RE: WATERGEMS
Hello Moustafa, Are you opening an old model or model saved in the version of WaterGEMS that you are using? Database file might have become corrupt, can you please try to compact database,...
View ArticleForum Post: RE: Import AutoCAD file in SewerGems - Terrain Model
Sushma Thank you for your reply. I am struggling though to convert to import the this CAD file as DXF. for some reason the contours doesn't cross over well. the end result is that the contours are...
View ArticleForum Post: RE: Import AutoCAD file in SewerGems - Terrain Model
Thanks for your reply. I tried to use Catchment Delineation tool, for some reason the contour has changed drastically when importing the file. have a look on the attached file please and tell me what I...
View ArticleForum Post: RE: Import AutoCAD file in SewerGems - Terrain Model
Hello Marc, Contours in drawing file are not in correct format, it appears as polyline but it is not a polyline but bunch of multiple lines joined together. The contour line should be a complete...
View Article