Forum Post: RE: Negative sign right the numbers in results file (profile - data)
Hello Moustafa, The negative sign on the right side is because of your system settings. Please go to Control Panel>Region>Additional settings>Negative number format>change it to negative...
View ArticleForum Post: RE: Huge Spike at Energy Grade Line
Hello Michelle, The particular spikes in energy grade line in profiles, are indeed because of branches meeting at that point in your model as observed by you. Which has been explained in detail in...
View ArticleWiki Page: Understanding the Modified Rational Method
Product(s): CivilStorm, PondPack, SewerGEMS, SewerCAD Version(s): CONNECT Edition, V8i Area: Modeling Overview The purpose of this technote is to clarify how the Modified Rational Method works, how it...
View ArticleWiki Page: What's New in SewerGEMS V8i SELECTseries 3?
Product(s): SewerGEMS Version(s): 08.11.03.77 Area: N/A Overview The SELECTseries 3 release of SewerGEMS includes many new features and improvements. Let's explore each of these in detail. -Support for...
View ArticleWiki Page: How can I global edit the pipe material and have the roughness...
Product(s): WaterGEMS, WaterCAD, SewerGEMS, SewerCAD, StormCAD, CivilStorm, Hammer Version(s): 08.11.XX.XX, 10.XX.XX.XX Area: Layout and Data Input Problem How can I global edit the pipe material and...
View ArticleWiki Page: Civil3D integration (Pipe network import/export)
Applies To Product(s): StormCAD, Civilstorm, SewerGEMS, SewerCAD, WaterCAD, WaterGEMS, HAMMER Version(s): V8i, CONNECT Edition Area: Data Import/Export Original Author: Glory John, Bentley Technical...
View ArticleForum Post: RE: Temporary weir
Thanks Jesse! The SWMM control sets are exactly what I am looking for. However, I have been working with the control sets and I have not been able to input the variable that I want, which is depth of...
View ArticleForum Post: RE: Temporary weir
Thanks Jesse. I added the Weir label and I received the same error message. Here is the error message in the calculation summary. ERROR 209: undefined object Outlet at line 55099 of [CONTROL] section:...
View ArticleForum Post: RE: Temporary weir
It is looking for the label of the weir, right after the word "weir". So for example instead of "..THEN Weir Outlet Weir...", use "...THEN Weir Weir...." If this does not help, please provide a...
View ArticleForum Post: RE: Temporary weir
RULE R1 IF SIMULATION TIME > 2.5 THEN Weir Weir STATUS = OFF ELSE Weir Weir STATUS = ON ; Here is the control structure dialogue and the control set code.
View ArticleForum Post: RE: Temporary weir
Ok, so the name of the weir is "weir". Did you try setting up the control per above, omitting the word "outlet"?
View ArticleForum Post: RE: Calculation with tidal effect
Hello Michael, The negative flows may be related to the hydraulic grade in the system. Since you are defining the elevation at the outfall, if the elevation is higher than the hydraulic grade further...
View ArticleForum Post: RE: Temporary weir
I did run it with the control code omitting the word outlet. The code above is the code in the control set. Thanks.
View ArticleForum Post: RE: Temporary weir
Ok. At this point it would be more efficient if you send us the model file for review. This will allow us to identify the exact problem. Sharing Hydraulic Model Files on the Haestad Forum
View ArticleForum Post: RE: Temporary weir
In the model you sent, the name of the weir is "Outlet Weir". I changed the name of the weir to Outlet_Weir (and the control statement), because the label cannot have spaces. This will get you past the...
View ArticleForum Post: Way to Compare Modeled Flow versus actual Metered Flow within...
Hello All, I am working within SewerGEMS (Version 10.01.01.04) with a co-worker to attempt to display wet weather flow data through a specific conduit against actual flow meter data that we have for a...
View ArticleForum Post: RE: "Only one gutter is allowed to come out of a catch basin" error.
Hello Asinati, Did you place two gutters on top of each other? If there is a gutter leading to the catch basin, and another gutter leaving the catch basin, make sure the rim elevations of the catch...
View ArticleForum Post: RE: Temporary weir
Thanks! I got everything up and running. I do have a quick question about the weir setting. Does the weir setting override the weir crest elevation that was set in the dialogue box? I.e. if the crest...
View ArticleForum Post: RE: "Only one gutter is allowed to come out of a catch basin" error.
I am trying to upload the file as a zip file here but I'm having issues. Is there a way I can use connection client to upload the file instead.
View ArticleForum Post: RE: Temporary weir
See the help topic "Control Set Formats": "SETTING is the fractional amount that an orifice is fully open or to the fractional amount of the original height between the crest and the top of a weir that...
View Article