Forum Post: RE: Inlet Capture Efficiency Question
Hello Minimum System Requirements, We seem to be having difficulty contacting you via your service request, so I wanted to provide some general feedback on your forum post here based on the...
View ArticleForum Post: RE: watercad/gem entering elevation at each node
Actually, on further inspection, it seems that there is a single duplicate value in the Value field. The 'key field' values should all be unique, so you will need to add an ID field in Excel as...
View ArticleForum Post: RE: Why GA?
WaterGEMS doesn't use genetic algorithms to solve the network hydraulic equations. Instead it uses a gradient algorithm (see the WaterGEMS Help for more details). WaterGEMS does use genetic algorithms...
View ArticleForum Post: RE: ArcMAP MXD loses link to SewerGEMS project file
Rdueck, It looks like I'm having trouble reproducing this one. Here is what I have tried so far given your steps: Attempt 1: Follow your instructions for steps 1-7 exactly using a new geodatabase and...
View ArticleWiki Page: System.OutOfMemoryException when viewing graphs or saving a model...
Applies To Product(s): Bentley WaterGEMS Version(s): 08.11.03.19 Environment: N\A Area: General Subarea: N\A Original Author: Jesse Dringoli, Bentley Technical Support Group...
View ArticleBlog Post: Meet Jonathan Smith – Bentley LEARNing Conference Trainer
Jonathan will be presenting several courses in the Hydraulics and Hydrology track at the Bentley LEARNing Conference in Birmingham, UK. His sessions include: Introduction to Subsurface Utilities...
View ArticleWiki Page: "Unexpected drawing version..." error when opening model
Applies To Product(s): Bentley WaterCAD, WaterGEMS, HAMMER, SewerCAD, SewerGEMS, StormCAD, CivilStorm Version(s): 08.11.XX.XX Environment: N/A Area: Other Subarea: Original...
View ArticleWiki Page: How do I batch merge nodes in close proximity?
Applies To Product(s): Bentley WaterCAD, Bentley WaterGEMS, Bentley HAMMER Version(s): 08.11XX.XX Environment: N/A Area: Layout and Data Input Subarea: Original Author: Mark Pachlhofer, Bentley...
View ArticleWiki Page: Controls for alternating between multiple pumps (Solution...
Applies To Product(s): Bentley WaterGEMS, Bentley WaterCAD Version(s): 08.11.xx.xx Environment: N\A Area: Modeling Subarea: N\A Original Author: Scott Kampa, Bentley Technical...
View ArticleForum Post: Pipe run not defined as continuous pipe list Message - Flushing Run
Received subject message after running flushing event. Is there a way to identify where the break in the pipe run occurs? The "Select All Elements with Message id 41848" is grayed out in the User...
View ArticleWiki Page: Why are there so many extra element types listed for WaterGEMS and...
Applies To Product(s): Bentley WaterGEMS, Bentley WaterCAD Version(s): 08.11.xx.xx Environment: N/A Area: Layout and Data Input Subarea: Original Author: Scott Kampa, Bentley...
View ArticleWiki Page: General WaterGEMS V8 [FAQ]
Applies To Product(s): Bentley WaterGEMS, Bentley WaterCAD Version(s): V8 XM, V8i Environment: N/A Area: N/A Subarea: N/A Original Author: Jesse Dringoli, Bentley Technical...
View ArticleForum Post: RE: Pipe run not defined as continuous pipe list Message -...
Matthew, I'm not sure what Message ID 41848 says, but I have a few ideas of what you might want to try if the problem is finding a break in the pipe run. Try color coding your pipes based on the field...
View ArticleForum Post: batch pipe split not working - "Object reference not set to an...
Hello, I'm having trouble performing batch pipe splits on a portion a distribution network. The vast majority of the network worked fine with batch pipe split but one area gives the message "Object...
View ArticleForum Post: RE: Pipe run not defined as continuous pipe list Message -...
41848 is just the message associated with the detected break in the flushing pipe run.
View ArticleForum Post: RE: Pipe run not defined as continuous pipe list Message -...
Thank you for the responses. Mark, your suggestion was helpful in trying to figure this out. It appears that I received the error as a result of defining the pipe set in such a way that the...
View ArticleForum Post: RE: Pipe run not defined as continuous pipe list Message -...
Good to hear you were able to figure that out Matt. I was actually in the process of creating another post that points out exactly where you found the problem to be, but I got side tracked with a few...
View ArticleForum Post: RE: ArcMAP MXD loses link to SewerGEMS project file
Thanks for your efforts, MPachlhofer. I am 99% sure that I have always followed the 7 steps you outlined. If I encounter the problem again and realize, if anything, I did differently, then I will be...
View ArticleWiki Page: Modeling A Pump Start-Up Transient Event In Bentley HAMMER V8i [TN]
Applies To Product(s): Bentley HAMMER V8i Version(s): 08.11.00.30 Environment: N/A Area: Modeling Subarea: N/A Original Author: Jesse Dringoli, Bentley Technical Support Group...
View Article
