Wiki Page: User Notification "GPV curve is undefined"
Applies To Product(s): Bentley WaterGEMS, Bentley WaterCAD, Bentley HAMMER Version(s): 08.11.XX.XX Environment: N/A Area: Output and Reporting Original Author: Craig Calvin, Bentley Technical Support...
View ArticleWiki Page: Will the minor losses associated with pipe bends be automatically...
Applies To Product(s): Bentley WaterGEMS, Bentley HAMMER, Bentley WaterCAD Version(s): 08.11.XX.XX Environment: N/A Area: Original Author: Mark Pachlhofer, Bentley Technical Support Group Problem Will...
View ArticleWiki Page: Why is the HGL reset to rim elevation for flooded structures?
Applies To Product(s): Bentley SewerCAD, Bentley StormCAD Version(s): 08.11.xx.xx Environment: N/A Area: Modeling Subarea: Original Author: Scott Kampa, Bentley Technical Support Group Problem...
View ArticleWiki Page: What is the difference between the Backwater Analysis and Capacity...
Applies To Product(s): Bentley SewerGEMS, Bentley CivilStorm, Bentley StormCAD, Bentley SewerCAD Version(s): 08.11.XX.XX Environment: N/A Area: Original Author: Mark Pachlhofer, Bentley Technical...
View ArticleWiki Page: Does friction method affect local minor loss in pipes? (Solution...
Product(s): Bentley WaterGEMS Version(s): 08.11.03.16 Environment: N\A Area: Modeling Subarea: N\A Problem Does changing the friction method in the calculation options change the local minor losses...
View ArticleForum Post: Can I recover an old WATERCAD file that was deleted by accident?
I need to recover an old WATERCAD file that was deleted. I could find it and finally recover it by using a Recovering software; however , when trying to open it ,there is an ERROR message. This error...
View ArticleWiki Page: Using SWMM Control Sets in SewerGEMS and CivilStorm
Product(s): Bentley SewerGEMS, Bentley CivilStorm Version(s): 08.11.xx.xx Environment: N\A Area: Modeling Problem Can SWMM Control Sets be used in Bentley's storm and sewer products? How is the data...
View ArticleWiki Page: "Network Unbalanced" problems with zero flow/ static conditions...
Applies To Product(s): Bentley WaterGEMS, WaterCAD Version(s): 08.09.XX.XX Environment: N\A Area: Calculations Subarea: N\A Original Author: Jesse Dringoli, Bentley Technical Support Group Problem Why...
View ArticleWiki Page: Can a model be saved down or back to an older version?
Applies To Product(s): Bentley WaterGEMS,WaterCAD,HAMMER, StormCAD, SewerCAD, CivilStorm, SewerGEMS Version(s): 08.11.XX.XX Environment: N/A Area: Other Original Author: Dan Iannicelli, Bentley...
View ArticleWiki Page: Troubleshooting "Network Unbalanced"
Applies To Product(s): Bentley WaterGEMS, Bentley WaterCAD Version(s): 08.11.xx.xx Environment: N/A Area: Modeling Subarea: Original Author: Scott Kampa, Bentley Technical Support Group Error or...
View ArticleForum Post: RE: Can I recover an old WATERCAD file that was deleted by accident?
Hi Gabriela, What version of WaterCAD are you using currently? To find the version number, open the Help menu and select About WaterCAD. The version number will appear on the lower-left corner of the...
View ArticleWiki Page: "Pressure pipe stop invert is higher than the connected wet-well...
Applies To Product(s): Bentley SewerCAD, Bentley SewerGEMS Version(s): 08.11.04.54 Environment: N/A Area: Layout and Data Input Subarea: Original Author: Jesse Dringoli, Bentley Technical Support Group...
View ArticleWiki Page: Where can I find the definition of a property?
Applies To Product(s): Bentley WaterGEMS, Bentley SewerGEMS, Bentley CivilStorm, Bentley StormCAD, Bentley PondPack, Bentley SewerCAD, Bentley HAMMER, Bentley WaterCAD Version(s): 08.11.XX.XX...
View ArticleWiki Page: How do pumps work in the hydraulics and hydrology products?
Applies To Product(s): Bentley WaterGEMS, Bentley SewerGEMS, Bentley CivilStorm, Bentley SewerCAD, Bentley StormCAD, Bentley HAMMER, Bentley WaterCAD Version(s): 08.11.XX.XX Environment: N/A Area:...
View ArticleWiki Page: Creating a dump file: "... Stopped Working" error when opening...
Applies To Product(s): Bentley WaterGEMS, WAterCAD, StormCAD, SewerGEMS, SewerCAD, CivilStorm Version(s): 08.11.xx.xx Environment: N/A Area: Installation Subarea: Original Author: Jesse Dringoli,...
View ArticleForum Post: Problem in importing dxf file as pipeline
We are facing problem in importing dxf files as pipeline. The model builder detects the drawing as pumping station which should be pipeline. The auto cad file is attached for reference. (Please visit...
View ArticleForum Post: Modeling Sanitary Sewer Forcemain
I am modeling a pump station and forcemain in WaterCAD and Hammer. At the forcemain discharge point I have attached the "discharge to atmosphere" element. My question is whether or not I need this...
View ArticleForum Post: RE: Modeling Sanitary Sewer Forcemain
Hello Rob, Assuming the force main is discharging a free outfall or manhole, the Discharge to Atmosphere element will more accurately reflect the results. You can find information on using the...
View ArticleForum Post: Need help with Water quality (chlorine ) graph
Hi, while simulating chlorine decay for an area. the results in the graph is starting from 76th and there after the results are stable.The Kb value and Kw value being -0.048/day and -0.05/day....
View ArticleForum Post: RE: SormCAD- How to get invert level of Box conduit above road...
Hello Rohit, 1) It is unusual to see a storm conduit that is above ground. In the automated design process, one of the highest design priorities is that minimum cover is attained. That being the case,...
View Article