Forum Post: RE: Changing Diameter in Auto-Design
Hi Craig, what are saying means to use larger diameter with less slope rather than keep smaller diameter with higher slope (which in the range we specifying) !! but that leads to sedimentation in the...
View ArticleForum Post: of Your Book (Advanced Water ...)
Hi In section 'Wave propagation in a Liquid' (P. 580) there is a sample which is confusing for me. What is the difference between c and a? What is the effect of direction of flow velocity in a pipe on...
View ArticleForum Post: RE: SewerGEMS export to SWMM
Hi Scott See example below (MH- MH-CSE-08-184 vs MH-1242 ) of the same model. MH-CSE-08-184 0.0138+0.0173 = 0.031 Here SewerGEMS adds the fixed loads and puts it into the Dry weather flow of SWMM...
View ArticleForum Post: RE: Changing Diameter in Auto-Design
If you are concerned with sedimentation, I recommend increasing the minimum velocity and minimum slope in the design constraints alternative.
View ArticleWiki Page: Associate a Project to a Hydraulic Model
Product(s): Bentley WaterGEMS, WaterCAD, HAMMER, SewerGEMS, SewerCAD, StormCAD, CivilStorm Version(s): N\A Environment: N\A Area: N/A Subarea: N\A Overview Bentley Hydraulics and Hydrology CONNECT...
View ArticleWiki Page: What is the difference between the Hydraulic Grade and Energy...
Applies To Product(s): Bentley SewerGEMS, Bentley CivilStorm, Bentley StormCAD Version(s): 08.11.XX.XX Environment: N/A Area: Original Author: Mark Pachlhofer, Bentley Technical Support Group Problem...
View ArticleForum Post: Tank Mixing Model
I am wondering the proper tank mixing models to use for the following mixing systems: Tide Flex Horizontal Tide Flex Vertical "completely mixed" gives the best results for water age, but I want this to...
View ArticleWiki Page: How can I change the vapor pressure limit based on fluid...
Applies To Product(s): Bentley HAMMER Version(s): 08.11.xx.xx Environment: N\A Area: Modeling Subarea: N\A Original Author: Jesse Dringoli, Bentley Technical Support Group Problem How can I change the...
View ArticleWiki Page: What’s new in StormCAD, SewerCAD, SewerGEMS and CivilStorm V8i...
Product(s): Bentley SewerGEMS, SewerCAD, StormCAD, CivilStorm Version(s): 08.11.05.113 Area: N/A Introduction CONNECT Integration Informational Prompt when Opening or Creating a Hydraulic Model Assign...
View ArticleWiki Page: Element Symbology labels are not displaying or drawing correctly....
Product(s): Bentley WaterGEMS Version(s): 08.11.03.17 Environment: N\A Area: Output and Reporting Subarea: N\A Problem The labels created in Element Symbology are not displayed on the drawing...
View ArticleWiki Page: What's new in WaterCAD, WaterGEMS and HAMMER V8i SELECTseries 6...
Product(s): Bentley WaterGEMS, WaterCAD, HAMMER Version(s): 08.11.06.113 Area: N/A Introduction CONNECT Integration Informational Prompt when Opening or Creating a Hydraulic Model Assign Project to...
View ArticleForum Post: RE: Tank Mixing Model
I have not heard of the first two you mentioned so I would be curious to know as well. I would think that shape and amount will dictate age more than anything. If you understand Unix systems, there is...
View ArticleForum Post: RE: of Your Book (Advanced Water ...)
Hi Mike, I'm not sure of another way to put an answer in other terms of what the book already says, but I'll do my best. At a given point in the pipe 'c' is speed of wave and is equal to the wave...
View ArticleWiki Page: Understanding Automated Fire Flow Results [TN]
Applies To Product(s): Bentley WaterCAD, Bentley WaterGEMS Version(s): V8 XM, V8i Environment: N/A Area: Output and Reporting Subarea: N/A Original Author: Jesse Dringoli, Bentley Technical Support...
View ArticleWiki Page: Can I design the sprinkler system using WaterGEMS?
Applies To Product(s): Bentley WaterGEMS, Bentley WaterCAD Version(s): 08.11.XX.XX Environment: N/A Area: Original Author: Sushma Choure, Bentley Technical Support Group Problem Can I design sprinkler...
View ArticleForum Post: How to analyse clash detection between pipes.
Hi, We are using Bentley software i.e. Water Cad, Sewer Cad, Storm Cad for the respective wet utilities design. We need to analyse the clash detection between utilities, please suggest the tools or...
View ArticleForum Post: RE: Tank Mixing Model
If you need further help with the WaterCAD model, we'll need some additional information on what these "tide flex" tanks look like, how the pipes connect, and a copy of the model file. There are two...
View ArticleForum Post: RE: of Your Book (Advanced Water ...)
The velocity of the flow doesn't effect the wave celerity, but it does effect how quickly a 'disturbance' moves along the pipeline. So if the flow velocity is +5 m/s and the wave celerity is 1000 m/s,...
View ArticleForum Post: RE: StormCAD input data
Hello Rohit, I have moved your post to the correct forum - Hydraulics and Hydrology Forum .
View ArticleForum Post: RE: How to Design Drainage line with differernt conduit shape in...
Hello Rohit, I have moved your post to the correct forum - Hydraulics and Hydrology Forum .
View Article
