Wiki Page: Discrepancy in the water age results for models with short pipes...
Applies To Product(s): Bentley WaterCAD, Bentley WaterGEMS Version(s): 08.11.xx.xx Environment: N/A Area: Calculations Subarea: N/A Original Author: Scott Kampa, Bentley Technical Support Group Problem...
View ArticleWiki Page: Is WaterGEMS capable of modeling the formation of constituents in...
Applies To Product(s): Bentley WaterCAD, Bentley WaterGEMS Version(s): 08.11.xx.xx Environment: N/A Area: Calculations Subarea: N/A Original Author: Scott Kampa, Bentley Technical Support Group Problem...
View ArticleWiki Page: The storm data for an incremental Time-Depth storm event does not...
Applies To Product(s): Bentley SewerGEMS, Bentley CivilStorm Version(s): 08.11.xx.xx Environment: N\A Area: Modeling Subarea: N\A Original Author: Scott Kampa, Bentley Technical Support Group Problem...
View ArticleWiki Page: What's New with Bentley HAMMER V8i SELECTseries 5
Applies To Product(s): Bentley HAMMER Version(s): V8i SELECTseries 5 (08.11.05.61) Environment: N/A Area: N/A Subarea: N/A Original Author: Scott Kampa, Bentley Technical Support Group Overview The...
View ArticleWiki Page: I defined a network that should have no flow in certain pipes and...
Applies To Product(s): Bentley WaterGEMS, Bentley WaterCAD, Bentley HAMMER Version(s): 08.11.XX.XX Environment: N/A Area: Layout and Data Input Subarea: Original Author: Mark Pachlhofer, Bentley...
View ArticleFile: ZeroDemand_ex7_WTRG
This is a model that contains two scenarios. One showing how to model a system where the demand is manually dropped to 0 using patterns and another where the demand is cut off from the system by...
View ArticleWiki Page: SELECTsupport TechNotes And FAQs
Key: CS – Client Server Article FAQ – Frequently Asked Questions TB – Technical Bulletin TN – TechNote VID – SELECTsupport Video The following TechNotes and FAQs are provided as a reference by...
View ArticleForum Post: What's New with WaterGEMS/WaterCAD/HAMMER V8i SELECTseries 5?
Interested in the new features and enhancements added to WaterGEMS, WaterCAD, and HAMMER V8i SELECTseries 5? Check out the What's New with WaterGEMS/WaterCAD V8i SELECTseries 5 and What's New with...
View ArticleWiki Page: How do I model a system where there is intermittent demand or...
Applies To Product(s): Bentley WaterCAD, Bentley WaterGEMS, Bentley HAMMER Version(s): 08.11.XX.XX Environment: N/A Area: Other Subarea: Original Author: Mark Pachlhofer, Bentley Technical Support...
View ArticleForum Post: RE: Bentley WaterCAD version
Magg, Did you try applying the latest cumulative patch set for that version, per the article? Have you confirmed that your version number under Help > About is indeed greater than or equal to the...
View ArticleForum Post: RE: Bentley WaterCAD version
Thanks Jesse, we sorted it out base on your suggested solution on the website, thanks you very much for help. Regards, Mag
View ArticleWiki Page: PondPack error: Non-increasing value for 2/t + O
Applies To Product(s): Bentley PondPack Version(s): 08.11.XX.XX Environment: N\A Area: Modeling Subarea: N\A Original Author: Scott Kampa, Bentley Technical Support Group Problem What does the...
View ArticleForum Post: SewerGEMS Error 20296 list and solvers
Hi all, I am having an issue with a particular error and can not solve it. ERROR 20296 - "There are 25 isolated nodes, or these nodes are in a subnetwork with no outfall, or these nodes are isolated...
View ArticleForum Post: SewerGEMS Load viewing
Hi all I have imported through the loadbuilder my loads for the network. I have two questions: 1. Can I view on the plan map where these loads are, or do they not have x,y co-ordinates and only can be...
View ArticleForum Post: RE: SewerGEMS Error 20296 list and solvers
Hi all I found the issue it was a small conduit that was missing along the network. Thanks
View ArticleForum Post: RE: SewerGEMS Load viewing
Hello Lee, 1. Can I view on the plan map where these loads are, or do they not have x,y co-ordinates and only can be viewed on the maintenance holes that they are connected to. The location of the...
View ArticleForum Post: RE: SewerGEMS Load viewing
Hello Lee, 2. Not all the loads were imported is there a distance adjustment that I need to do ? We will likely need some additional information on this issue. What method are you using to import the...
View ArticleWiki Page: What's New in SewerGEMS and CivilStorm V8i SELECTSeries 4
Applies To Product(s): Bentley SewerGEMS, Bentley CivilStorm Version(s): V8i SELECTseries 4 (08.11.04.54) Environment: N/A Area: N/A Subarea: N/A Original Author: Sushma Choure, Bentley Technical...
View ArticleForum Post: RE: SewerGEMS Load viewing
Re: 2. Not all the loads were imported is there a distance adjustment that I need to do? Depends on what loadbuilder method you used, but if for example you used billing meter aggregation, maybe some...
View ArticleWiki Page: When trying to update a geometric network in Modelbuilder for...
Applies To Product(s): Bentley WaterGEMS Version(s): 08.11.XX.XX Environment: ArcMap, ArcGIS Area: Layout and Data Input Subarea: Original Author: Mark Pachlhofer, Bentley Technical Support Group...
View Article