Forum Post: RE: How to include Mass Transfer Coefficient into MSX
Hi Ryan, I think there has been some confusion in this thread for which I apologize. The first thing to note is that the UDX route won't work, not because there is anything wrong with UDX (it's a cool...
View ArticleForum Post: RE: EPS. High Service pumps
I'm still struggling. Is there a phone number for tech support?
View ArticleForum Post: RE: Inserting elements with right click
Paul, Is this the right-click (menu) you are trying to use? If so, from the Layout tab in your model, click the place Pipe command and left-click a placement point in your model to place the first...
View ArticleForum Post: RE: How to include Mass Transfer Coefficient into MSX
Ryan, it's admirable to try to apply MSX to your situation but I prefer to approach things incrementally. I believe it was Einstein who said, "A model should be as simple as possible but no simpler."...
View ArticleForum Post: RE: Default File Path in HAMMER
Hello Alice, When a model is computing, output information is temporarily written to your Windows temporary folder. You can jump to this location in File Explorer using the shortcut %temp% , but the...
View ArticleForum Post: RE: EPS. High Service pumps
[quote userid="1025144" url="~/products/hydraulics___hydrology/f/haestad-hydraulics-and-hydrology-forum/184764/eps-high-service-pumps/541255"]Under Patterns - Pump, I created a pump pattern which shows...
View ArticleForum Post: RE: Inserting elements with right click
If by "inserting elements" you mean inserting a node in the middle of a length of pipe, you can click the node from the layout toolbar (for example junction layout tool for WaterCAD or WaterGEMS), then...
View ArticleForum Post: RE: How to include Mass Transfer Coefficient into MSX
G’day Tom, Firstly I would like to start by saying I’m aware of the limitations of Chlorine Decay Modelling and I understand it's questionable whether this process is worth the effort given the...
View ArticleForum Post: RE: Capacity (Excess design) is changing for pipes not set to be...
I will also reiterate that the global part full design parameter can still impact the "capacity (excess design)" result. If you change this, it will change the way that this result is calculated, for...
View ArticleForum Post: RE: Default File Path in HAMMER
Hi Jesse, Thanks for your answer. I've tried using the custom results file path which works. Further building on my question, do you know if it is possible to save the results files on Bentley's...
View ArticleForum Post: RE: Default File Path in HAMMER
Hello Alice, at this time the custom results file path cannot point to ProjectWise. This is mainly due to the fact that output files can sometimes be very large so it could take a very long time to...
View ArticleForum Post: RE: Default File Path in HAMMER
Understood. Thanks for sending the link to the workaround.
View ArticleForum Post: RE: EPS. High Service pumps
Thank you, Jesse. May I request a phone conversation with a member of the Support Team today? Attached is a copy of my model. communities.bentley.com/.../Rogersville-Model-0819-875-CAL-eps.wtg
View ArticleForum Post: RE: EPS. High Service pumps
Hi Jamie we can certainly do that, but it looks like only the .WTG file was attached. All of the model data is in the .SQLITE file. Per the article, please compress both into a zip file (or go to File...
View ArticleForum Post: RE: EPS. High Service pumps
When I tried to send the zipped file, I received an "An error occurred. Please try again or contact your administrator." message. Twice. Any thoughts?
View ArticleForum Post: RE: EPS. High Service pumps
communities.bentley.com/.../Rogersville-Model-0819-875-CAL-eps.wtg.zip
View ArticleForum Post: RE: EPS. High Service pumps
Jamie, the zip file appears to have attached successfully and I can see both the .WTG and .SQLITE files inside. We will get back to you shortly.
View ArticleForum Post: WaterGEMS Darwin Calibrator how to find locations of valve closer?
Is there a manual on how to use Darwin Calibrator for finding possible locations for valve closure? YN
View ArticleForum Post: PDD vs DDA in WaterGEMS
Dear all, I am currently running some simulations using WaterGEMS (Connect Edition) using PDD. I want to run the same model, under same pump and other conditions, using DDA. However, currently the DDA...
View Article