Hello Rohit, DXF Point and DXF Contour files can be used. You should make sure to choose the appropriate source file type for the file you have. For instance, if it is a DXF Contour file, make sure to select the DXF Contour source file type. If that doesn't help, try loading the DXF file as a background layer. You can do this by choosing View > Background Layers. Choose "New File" and select the DXF file. You may need to do a Zoom Extents to see the background. The purpose of this is to make sure that the coordinates of the model matches that of the DXF file. If the DXF file doesn't overlay the model, TRex will not be able to import the elevation data. If this doesn't help either, we will need a copy of the model files, as well as the elevation data file. There are two options for sharing your model on Communities, whichever you choose please be sure to zip your files first. The first option is to attach the zip file containing your model to your reply on the forum using the Advanced Reply Editor (you'll find the link below and to the right of the reply box). If your data is confidential please use the instructions in the link below to send it via Bentley Sharefile. Files uploaded to Sharefile can only be viewed by Bentley employees. communities.bentley.com/.../7079.be-communities-secure-file-upload If you upload the file to Sharefile, please post here with the name of the file so that we know it is available. Regards, Scott
↧